How To Keep Mattress From Sliding

8 min read

Are you fed up with your mattress moving around every night? That’s a common problem, but one that can be easily solved. 

Don’t let it get the better of you – there are plenty of ways to keep your mattress from sliding. 

In this article, we’ll delve into the depths of creative solutions for stopping your mattress from sliding. 

We’ll examine everything from DIY methods to store-bought products. 

So if you’re ready to put an end to your bedtime troubles, read on! 

It’s time to put a stop to all that shuffling and get a good night’s rest – no more tossing and turning!

Assess The Situation

1 77

It’s estimated that more than 80% of people have experienced their mattress sliding off the bed frame at least once. 

This can be an annoying problem that affects sleep quality and comfort. Fortunately, there are several ways to keep a mattress from sliding.

First, it’s important to assess the situation. 

Is the mattress on a platform or box spring? Does it have any grip on the base? Answering these questions can help determine which method to use.

If the bed is on a platform or box spring, consider adding additional support. 

This can include replacing old screws and brackets with new ones, as well as securing them with washers to give extra grip. 

If there is already enough grip but extra support is needed, adding furniture pads can also help keep the mattress in place.

When transitioning into the next step, consider using a non-slip mat underneath the mattress. 

It provides an added layer between the bed frame and mattress which helps reduce slipping and sliding. 

The mat should fit snugly against the bed frame so that it doesn’t move around itself over time. 

With these simple steps, you’ll be able to keep your mattress secure for many years to come.

Try A Non-Slip Mat

You wake up in the middle of the night and feel yourself sliding, your mattress shifting beneath you as you try to settle back into sleep.

You’re left with a feeling of frustration and helplessness – how can you prevent this from happening again?

One way is to try a non-slip mat. 

These mats are designed to reduce sliding on any surface, including beds. 

They come in different shapes, sizes, and materials so you can find one that fits your mattress perfectly. 

With their strong grip, they’ll keep both you and your mattress in place no matter how much tossing and turning you do. 

Plus, they’re easy to install – just place it on the floor under your mattress and it should do the trick!

Non-slip mats are an effective solution for keeping your mattress from slipping around during the night. 

So don’t give up on a good night’s rest – give these mats a try! Moving forward, all that’s left is to elevate the bed…

Elevate The Bed

2 75

Trying to keep your mattress from sliding can feel like a full-time job! But don’t despair, the third solution may just be the ticket. 

You guessed it, elevate the bed. 

The best way to elevate your bed is with some sturdy wooden blocks or risers, which can work wonders in keeping your mattress in place. 

You can also add additional support by using some furniture glides on each corner of the bed frame – this will help keep things nice and snug so you won’t have to worry about waking up with your mattress in an entirely different spot!

Once you’ve got everything lifted off the ground and properly secured, you’ll want to make sure that everything is still safe and secure. 

This means checking all connections between the frame and risers or blocks – if they’re loose or wobbly it could lead to an unexpected crash during the night. 

Also double-check those furniture glides; if they’re not installed correctly they won’t provide any extra stability for your mattress! 

And voila – you can rest assured knowing that your mattress won’t go anywhere without you wanting it to.

Secure The Bed Frame

Secure the bed frame. This is one of the most important steps in preventing your mattress from sliding around. 

It’s an easy task that requires minimal effort. 

All you need is a few basic tools such as a screwdriver, some screws, and a ruler.

First, measure the height of your bed frame and mark it with a pencil. 

Next, make sure the screws are long enough to secure the bed frame to the floor; if not, replace them with longer screws. 

Finally, use the screwdriver to tighten each screw into place. Make sure they are secure before moving on to the next step.

Using this method ensures that your bed frame won’t move or slide when you’re sleeping or lounging in it. 

With this done, you can now create a barrier between your mattress and floor to keep it from slipping further.

Create A Barrier

3 61

In the ever-present struggle to keep a mattress from sliding, creating a barrier is essential. 

As a rule of thumb, obstacles can act as a buffer, shielding the mattress from movement. 

Accordingly, this fifth step in preventing mattress slipping is equally important.

To begin, it is imperative that one has the right materials for the job. 

The best option is to use carpet tape or double-sided tape to create a firm boundary between the bed frame and the mattress. 

Though it may be tempting to use other items such as superglue or bungee cords, these materials are not suitable for this task. Carpet tape will be able to support the weight of both the bed frame and mattress without giving way.

Once equipped with the necessary tools, one must then apply them in an effective manner. 

To do so, measure out how much tape is required and apply it around all edges of both objects where they meet – making sure it’s even and sticking properly – before slowly aligning them together until satisfied with its position. 

With this final push, your mattress should remain secure within its confines; ready to take on any amount of tossing and turning!

Anchor The Mattress

Anchoring the mattress is an effective way to keep it from sliding. 

No more slipping and sliding while turning in bed. 

No more waking up on the other side of the bed. Secure the mattress and sleep soundly.

Using heavy-duty straps, anchor the mattress to the bed frame. Get creative with how to do this, if necessary. Move furniture or use a box spring to secure the mattress in place. 

Don’t forget: once you have anchored the mattress, tighten and secure the slats.

Make sure there are no gaps between your mattress and bed frame that could cause it to move out of place during sleep. 

Anchor those edges tightly! With these steps taken, you will be able to sleep worry-free knowing your mattress won’t slip off again. 

Your hard work will pay off for many night’s rest!

Tighten And Secure The Slats

Tightening and securing the slats is the next step. This helps keep the mattress from shifting around. Start by checking to see if the slats are secure. 

If they’re loose, use a screwdriver or drill to tighten them up. Make sure not to over-tighten, as this can cause damage.

Once the slats are tightened, use glue or adhesive strips to secure them in place. For extra security, use clamps or brackets to hold it down further. 

These items can be found at most hardware stores and will help keep the mattress in place even better than glue alone.

The last step is to make sure everything is firmly secured so that there’s no chance of it slipping out of place. 

This will help ensure your mattress stays put no matter how much you move around while sleeping.

Secure The Mattress With Straps

Attaching straps is simple and requires just a few supplies. 

You will need four straps or bungee cords and two sets of bed slats for each corner of the mattress. 

Place the slats at each corner and then attach the straps to them, making sure they are tight enough that the mattress won’t move. 

Make sure to check all four corners after completing this step and double-check them periodically to make sure they remain secure.

Securing your mattress with straps is an easy way to add stability and reduce sliding while you sleep. 

Not only will this help keep you comfortable throughout the night, but it will also help prevent noise from occurring as you move around during sleep. 

Plus, it’s a great way to ensure you’re safe when getting in and out of bed – no more slipping or sliding!

Consider A New Bed Base

Next up is considering a bed base. It’s an important step for keeping a mattress from sliding. Here’s why:

First, it adds support. 

A bed base gives a mattress the stability it needs to stay in place, even when weight is applied. 

Second, it reduces wear and tear on the mattress. 

Bed bases help prevent excess shifting that can wear out the material faster over time. Third, they look great! 

A bed base can improve the overall look of your bedroom, making it feel more put-together and comfortable.

Bed bases come in many different styles and sizes to match any room design and budget. 

Plus, they’re easy to install – no tools required! So if you’re looking for an easy way to keep your mattress from sliding around, consider getting a bed base today.

It’s also worth thinking about the floor covering underneath your mattress too. Different materials may cause more slipping than others, so choosing the right one is key.

Choose The Right Floor Covering

When it comes to keeping a mattress from sliding, the floor covering can be an important factor. If your floor is slippery it could move your bed frame which will move your mattress.

There are many options available, each with its own advantages and disadvantages.

Hardwood and laminate flooring don’t offer much in terms of friction, so they’re not ideal for this purpose. Consider instead:

  • Carpet – provides adequate grip, but may not hold up as long as other materials 
  • Vinyl or linoleum – offers good grip and is easy to clean 
  • Rubber mats – provides superior grip and is durable

These materials can help keep the mattress in place without being too abrasive.

They also provide additional cushioning, making them a great choice if you have a softer mattress.

All of these choices are relatively inexpensive, so you won’t break the bank trying to keep your mattress from sliding around.

No matter what material you choose, make sure it fits properly and doesn’t create any gaps or uneven areas that could cause slipping. 

Proper floor covering can make all the difference when it comes to ensuring your mattress stays put.

Frequently Asked Questions

How Much Does It Cost To Secure A Mattress?

Securing a mattress can be a necessary expense, especially if it’s prone to sliding. Allusion to this common problem is something we can all relate to; that feeling of waking up in the middle of the night and realizing your mattress has slid off the bed frame. 

It’s an annoyance that can have solutions, but at what cost?
The cost of securing your mattress can vary depending on the preferred method. You could opt for heavy-duty furniture straps or adjustable bed risers, both of which cost around $20 – $30 USD per set. 

If you want something more permanent, you could use mounting screws or even special foam blocks designed specifically for mattresses. 

These solutions tend to run anywhere from $40 – $60 USD.
It may seem like a lot of money for such a simple project, but it’s worth it in the end when you don’t have to worry about your mattress sliding anymore. 

There are plenty of options available and they come with varied prices; so no matter what type of mattress you have, there’ll always be something you can do to keep it in place!

Will A Non-Slip Mat Work On All Types Of Floors?

The question of whether a non-slip mat will work on all types of floors is an important one. After all, who wants their mattress to slip and slide around? Taking the time to secure a mattress to the floor can help maintain its placement and save money in the long run.

Rhetorically speaking, securing a mattress is like finding a safe harbor from the stormy seas of life – it gives you stability and peace of mind. But what if you don’t have the funds for a costly solution?

A non-slip mat may be just what you need! It’s inexpensive, easy to apply, and works on virtually any type of flooring. 
Plus, it won’t damage your furniture or harm your health.

TIP: Make sure you choose an anti-skid mat that’s made specifically for mattresses so that it holds up better over time.


No one likes it when their mattress slides around while they sleep. It’s not only annoying, but it can also make it harder to get a good night’s sleep. 

Securing the mattress is an easy and cost-effective way to ensure you get the restful slumber you need.

I’m here to tell you that securing your mattress is absolutely worth the effort. 

It’s like adding a whole extra layer of comfort – except this layer will never slip away from you! 

You’ll never have to worry about waking up in the middle of the night with half your bed on the floor again.

In short, taking measures to keep your mattress firmly in place is essential if you want peaceful sleep every night. 

It doesn’t matter what type of surface you have or how much money you have to spend – there are always options available for keeping your mattress secure so that you can get all the restful sleep you deserve!

Popular Posts You’ll Enjoy!